Anti-Foldover Garland
IMPORTANT NOTE (UPDATE): I have eliminated the zip-tie from one side of each loop with no change to the anti foldover feature. After treating the cord the time to construct/build will vary from person-to-person--I made this one in approx. 3 hours.
…
Ecig fogger--Modifying 3 different types of E-Cigs (step-by-step) by Rick Findley
Demonstrated here are 3 EGO E-Cigarettes whith different styles of atomizer/tank tips. Each different style is modified with an identical method with the same results and with no modifications to the Ecig itself.
NOTE: It is my opinion this Ecig design is not the proper tool for producing very, very large vapor filled bubbles no matter how much you modify the Ecig itself. If you want to increase the air flow simply loosen the connection where the atomizer screws into the battery section for a tiny bit more air flow.
If making large "smoke" filled bubbles faster is your goal I recommend moving up to a modified Zero Launcher or Dragon Puffer available online through Zereo Toys, Inc. [EDWARD NOTES: This recommendation seems no longer to be a…
Demonstrating the capcaity of 3 different styles of hoops by Rick Findley
This demonstrations are based on the travel hoop described here. A plain PEX hoop with no covering or wrapping:
A PEX hoop with an optional ribbed sleeve:
A hoop wrapped with some rayon mophead yarn:
A wiki visitor (perhaps Burbrujo?) notes: "I have begun to wrap each section of my Travel Hoop while unassembled and attach each end with a zip (wire) tie. This way you do not have to re-wrap it everytime you reassemble it. (Note: Each wrap is approx one inch apart from the other)."
DIY ANTI-FOLDOVER GARLAND
https://www.facebook.com/media/set/?set=a.668011289933962.1073741919.100001752912722&type=1&l=c7024ba8dd
This is a link for a step-by-step DIY Anti-foldover garland rig by Rick Findley. (Further editing to be done to make it fully displayed on this wiki)
Sorry, but I have not had time to post the entire step-by-step method here on the wiki other than the link above.
DIY Compact Travel Hoop for KIB
This article demonstrates a portable large hoop design that is great for Kid in a bubble (KIB) work and other large and medium hoop work. See also the optional ribbed sleeve which increases capacity. See the Kid in a bubble article for moat ideas.
UPDATED INFORMATION: It is possible to eliminate the dowel plugs for all the connectors except for the "T" fitting and where the handle is connected to the "T" fitting. The connectors remain tightly fitted without them but I prefer using the dowel plugs if only to eliminate any chance the connectors getting misplaced when disassembled.
The hoop is made from 1/2" PEX tubing made by Sharkbite which is an excellent material for constructing hoops large and small. The design shown here breaks down in…