Getting Started With Tri-Strings

This article still needs to be written. It will be the page for people new to tri-strings. 

Even a 3 year-old can make giant bubbles with a tri-string wand.

 

Tips for getting Started

Tri-string wands (also called tri-wands) can be simple or complicated. They are available commercially, but it is quite easy to make them.

To get started all that you really need are:

• Two handles
• A "loop" of material (that we call a wick)
• Bubble juice
• A dipping container

Bubble Juice. The guar-based bubble juice recipe is a great recipe and very easy to mix. For most people, the ingredients are easily found locally. You will find many more recipes on the main Recipes page.

Wand. A very simple wand can be made from chopsticks (or dowels or bamboo gardening stakes) and a strip of t-shirt material (best to use a new one), cotton shoelace or cooking twine. Click here for directions for a super-simple tri-string.

Simple tri-wand projects:

• Super-simpler tri-string . DipStix-style wand made from chopsticks (or bamboo garderning stakes or dowels) and a t-shirt.
• Glowby's simple tri-string. This is an elegant simple design made from dowels and cotton twine.
• Edward's Simple Tri-string overview. Some general instructions for making a first tri-string.

Loop Materials

Here are some easily available (at least in the USA) materials for tri-string loops that are quite effective. Most of the videos were made with tri-string loops made from one or more of these materials. For more about loop materials see the Wicks article.

In general, it is often helpful to wash your twine with laundry detergent and letting it thoroughly dry. This will pre-shrink the material and help break it in -- as well as remove any sizing that might adversely affect them. Some people pre-wash their materials in a washing machine (taking care to take precautions so that they do not become tangled during washing).

• Cotton (cooking) twine. High-quality cooking twine works very well. This excellent wick material can be improved with a technique called soda washing. The cooking twine found at Bed, Bath and Beyone tends to be very effective. Other cotton twine can work well also. While a single strand of twine can be effective, you can increase the size potential dramatically by usin 2 to 4 strands for the top-string. You can make custom cord easily or simply carefully measure the top-strings so that they are the same length. High-quality cotton twine is HIGHLY recommended for your first loop -- and may be your last loop as it works so well.
• T-Shirt Yarn. Lightweight unused cotton undershirts (Hanes and Fruit-of-the-Loom are known to work well) can provide an excellent material. You can cut a loop from an extra-large men's undershirt by cutting across the bottom as shown in the article Making a Super Simple Tri-String. This will supply a loop with an approximately 32" top-string which can make tubes well over 25 feet long in the right conditions with the right bubble juice. You can make long strands by using the spiral cut technique.
• Jute twine. Jute twine has excellent capacity and releases the juice well. It tends to be very fuzzy which can foam up the juice.
• Mop Yarn. Some types of mop yarn are the preferred materials of many bubblers. Not all mop yarn is created equal. See the Mop Heads article for recommendations.
• Diamond-braid cotton cord (with core removed). Some (but not all) diamond braid cotton cord is very effective. Read more about it in the Wicks article.

For getting started, a 32" top-string loop is a good size. With the right material and juice, you can create tubes 40 feet or longer in the right conditions, and they are easy to maneuver. 48"-long handles would be a good length for such a loop.

Some people start with 48" loops, but these can be trickier to work with if it is breezy or the conditions are not good.

Doubling up. While many avid bubblers make custom twisted cord (it is suprisingly easy to do), you can easily increase the capacity of your loops by adding an extra length of material to your top-string. The top-string's capacity has a much bigger impact on the bubble size than the bottom string's. (See [Composite Tri-String Loops] for more about this.) A 36" top-string loop made from a single strand of high-quality 100% cotton twine can make pretty huge bubbles. Adding another 36" length of the twine to the top-string will increase the size potential dramatically. As long as the added strand is the same length as the loop's existing top, the wand will be well-behaved. If there is a size mismatch, the only drawback is that you may sometimes get extra bubbles riding on the main bubble.

Loop Size and Dimensions

If you think of the bubble loop as a triangle whose base is on top, you want all sides to be about the same. The base (which will actually be on top) is called the top-string. The part that hangs down is often called the bottom-string or down-string or the side-strings.

The loop can be made from one, two or three lengths of cord (see Loop Styles, below). Typically, one uses just one length of wick material tied into a loop, or two lengths: top-string and bottom string. If using two lengths, the bottom string should be twice the length of the top. (Some people prefer slightly different ratios, but most stick to the "classic" design.)

Loop Styles

There are many ways of making a loop. See Tri-String Loop Styles for ideas.

Attachment Styles

If bubbles become a hobby, it is often handy to be able to change loops. There are many ways of doing this.

PLACEHOLDER. THIS ARTICLE NEEDS TO BE FILLED IN.

See Also

See also:

• Tri-String Wands
• Composite Tri-String Loops
• Modular Tri-String Loop
• The Tri-string category page